disa shotblasting icon
Call Us +86 13589238091

DS200M-EP abrasive blaster

Get in touch

Leave your details below and one of our specialists will be in touch as soon as possible.

ds200m-ep abrasive blaster

This abrasive blaster features a 200L capacity for continuous all-day operation and minimal refills. Its 10-bar output and high-flow nozzle boost blasting efficiency, while the lightweight design ensures easy maneuverability across complex job sites.

Features and benefits:
  • Optimum efficiency User-friendly and safe simple to relocate
  • extremely accurate dosing of abrasive for an optimum balance of air and blast media
  • Easy Disassembly & Serviceability
  • dual line deadman system to prevent unchecked operation
  • emergency stop button, so that the pot can also be switched off quickly by third parties
  • minimum fall in pressure due to air piping, main air tap and mixer pipe being correctly aligned to eachother
  • complete use of abrasive in the pot due to its funnel shaped body
  • Bolt clamps on pusher line make field repairs easier
  • Full flow auto air valve for fast starts and stops
pressure-pot1

Product Description:

The DS200M-EP abrasive blaster is a comprehensive pressure blasting system featuring an electro-pneumatic control box and a deadman’s handle for enhanced safety and operational control. The complete package includes a 200-litre pressure blast pot equipped with a pop-up valve, a pneumatic main air valve, and a pneumatic exhaust valve with silencer. For abrasive management, it comes with a manual abrasive valve. Operator control is facilitated through a pneumatic remote control system integrated with the deadman’s handle, connected via a 25-meter remote control hose and a 25-meter cable specific to the EP edition. Essential air preparation is handled by a built-in moisture separator. The system also provides 20 meters of heavy-duty 1¼” blast hose, a blast coupling, a nozzle holder, a high-performance tungsten venturi blast nozzle, and a built-in two-step helmet filter for operator protection.

DSP200-abrasive-blaster1 DSP200-abrasive-blaster1

NO.                  DESCRIPTION                                     PART#
1        1″×2-1/2″ Pipe Thread Nipple                         628306
2        1″Galvanized Pipe Tee                                      337247
3        1″Galvanized Square Head Pipe Plug              337248
4        1″ Pipe Thread Street Elbow                             628327
5        1″Exhaust Muffler                                             651262
6        1-1/4″ Pipe Thread Close Nipple                      628255
7        1-1/4″x 1-1/2″×1-1/4″ Pipe Thread Pipe Tee   628314
8        1-1/2″ Pipe Thread Street Elbow                      628325
9        1-1/2″ Pipe Thread Close Nipple                      628256
10      1-1/4″ Pipe Thread Full Port Brass Ball Valve    446171
11      1-1/4″I.D.Pusher Line Assembly                        263131
12      10″Wheel                                                          560101
13      Wheel Clip                                                        628277
14      1-1/4″Abrasive Metering Valve                         267031
15      1-1/4″Brass Tank Coupling                               457246
16      1-1/4″45°Street Elbow                                      628316
17      1-1/4″x 1-1/2″×1-1/2″ Pipe Thread Pipe Tee    628313
18      1-1/2″ Pipe Thread Full Port Brass Ball Valve    446172
19      1-1/2″I.D.Pusher Line Assembly                        263132
20      1-1/2″Abrasive Metering Valve                         267037
21      1-1/2″45°Street Elbow                                      628307

Do you have questions?

Our consultants are ready to answer your questions by phone, via email or WhatsApp (button below). Or go back to the overview of custom blast cabinets!

Contact US