Need advice?
- (86)-0532-012345678
- 15112345678
- disa@disachina.com
Get in touch
Leave your details below and one of our specialists will be in touch as soon as possible.
The solution for reliable and cost-effective blasting
Even the most advanced technology loses its value if equipment issues arise without timely support. To truly deliver lasting value to manufacturers, equipment must operate at peak performance at all times. As a shot blasting machine manufacturer with a dedicated 24/7 customer support center, Disa ensures that wherever your equipment is located around the world, professional and reliable after-sales service is always within reach.
Our team provides timely support to minimize your downtime. We build lasting partnerships through safe, reliable, and cost-effective service.
We provide complete blasting solutions integrated with automation and handling systems. Our customized approach ensures optimal ROI for your specific application.
Control and monitoring of the media flow rate is done by using a MagnaValves® and is a closed-loop process. This Magna valve is a normally closed magnetic valve and includes a built-in sensor for accurate measurement of flow rate. Used with our specially developed closed-loop software (no separate controller needed), the Magna valve will provide accurate and repeatable flow rates.
The valve construction includes a permanent magnet for normally closed operation and an electromagnet for controlling media flow rates. By regulating the voltage to the electromagnet, any desired flow rate may be achieved. When power is off, the valve will hold the media due to the permanent magnet.
To guarantee the media flow is within the minimum and maximum limits, alarm scales can be adjusted on the operator screen in the central switch board e.g. 5% deviation gives a visual alarm and 10% deviation is shutdown of application.
Meets SAE AMS 2430 and 2432 specifications.
The 700-24 MagnaValve® is a normally closed valve that regulates the flow of non-ferrous media. The MagnaValve’s built-in sensor measures flow rate and, together with our specially developed software (no separate controller needed) provides accurate and repeatable flow rates. Ceramic bead and glass bead can be used in this valve. Other non-ferrous materials, such as Aluminum Oxide (AlOx), may also be used by special arrangement.
To guarantee the media flow is within the minimum and maximum limits, alarm scales can be adjusted on the operator screen in the central switch board e.g. 5% deviation gives a visual alarm and 10% deviation is shutdown of application.
Meets SAE AMS 2430 and 2432 specifications.
The air pressure (= working pressure) can be adjusted on the HMI operator screen. This operator screen is connected to the main proportional electronic controlled reducing valve. This valve adjusts and monitors the air flow rate continuously.
To guarantee the air pressure is within the minimum and maximum limits, alarm scales can be adjusted on the operator screen in the central switch board e.g. 5% deviation gives a visual alarm and 10% deviation is shutdown of application.
Questions?
Ask our experts about our shot and sandblasting machines. We are at your disposal for any product or service assistance.